12v Smps

Features: High efficiency, high reliability and low cost Switch input voltage range choice 100% full load and machine test Protection characteristics: short circuit/overloadAir cooling Working frequency 37 KHz Two years warranty Size:159*98*38mm(L*W*H)modelS-60-5S-60-12S-60-15S-60-24S-60-48outputDc output voltage5V12V15V24V48VOutput voltage tolerance±2%±1%±1%±1%±1%Rated output current12A5A4A2.5A1.3AOutput current range0-12A0-5A0-4A0-2.5A0-1.3AOutput power60W60W60W60W62.4WRipple and the noise120mVp-p120mVp-p150mVp-p150mVp-p200mVp-pDc voltage adjustable scope+10, -5%±10%±10%±10%±10%Start, rise, keep time800ms,50ms,10ms/115VAC 300ms,50ms,80ms/230VACinputInput voltage range90 ～132 VAC / 180-264VAC by switch 47～63 Hz；120～370VDCExchange input current2A/115 V 1A/ 230 Vefficiency73%76%77%79%79%Impulse currentCold start current 30A/115VAC 60A/230VACLeakage current＜3.5 mA/240VACProtection characteristicsOverload protection115%～165%Protection way: current limiting, automatic recoveryOver-voltage protection115%～135%Protection way: hiccups, auto recovery modeenvironmentWorking temperature, humidity-10℃～+60℃；20%～90 %RHKeep temperature, humidity-20℃～+85℃；10%～95 %RHVibrate resistance10～500Hz,2G 10min./1 cycle time, 60 minutes, the axissecurityCompression sex3: KVAC between input and output and input and output KVAC:1.5 to 0.5: KVACInsulation resistanceBetween the input and output, the input and output, and ground:100M Ohms/500VDCstandardSafety standardsAccord with UL1012, UL1950,TUV EN60950EMC standardsAccord with EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11；ENV50204,EN55024otherweight0.5Kgpackaging30pcs/15.8Kg/0.99CUFTnote1.All the parameters in has not specified, all is in 230 VAC voltage input, rated load and 25 ℃ conditions measuring income value.2. Ripple and noise voltage is in 20 MHz bandwidth oscilloscope take 12 inches twisted pair end with 0.1 mu and 47 u when capacitance measurement.3. Tolerance is voltage setting error, the voltage adjustment rate and adjust the sum total of the current rate.4. The power to consider as a device installed in final equipment, this equipment must be to make sure it’s EMC index.5. Specific output current see output drop forehead curve