D-60

Features:High efficiency, high reliabilityFor AC power supply input global100% full load and machine testProtection characteristics: short circuit/overload/pressureHas the boot display (light emitting diode (led)Air coolingWorking frequency 54 KHz1 year warrantySize: 159 * 98* 38 mm (L * W * H)modelD-60AD-60BCH1CH2CH1CH2outputDc output voltage5V12V5V24VOutput voltage tolerance±2%±6%±2%±5%Rated output current4A3A3A1.8AOutput current range0-4A0-3A0-3A0-1.8AOutput power56W58WRipple and the noise75mVp-p150mVp-p75mVp-p150mVp-pDc voltage adjustable scopeCH1： -5%,+10%CH1： -5%,+10%Start, rise, keep time300ms,50ms ,80ms/230VAC 800ms,50ms,10ms/115VAC Loaded withinputInput voltage range85～264 VAC/ 47～63 Hz； 120～370VDCExchange input current2A/115 V 1A/ 230 Vefficiency73%76%Impulse currentCold start current 30A/115VAC 60A/230VACLeakage current＜3.5mA/240VACProtection characteristicsOverload protection105%～150%Protection way: current limiting, automatic recoveryOvervoltage protection115%~135%Protection way: hiccups, auto recovery modeenvironmentWorking temperature, humidity-10℃～+60℃；20%～90 %RHKeep temperature, humidity-20℃～+85℃；10%～95 %RHVibrate resistance10 ~ 500 Hz ac, 2 G 10 min. / 1 cycle time, 60 minutes, the axissecurityCompression sex3: KVAC between input and output input and ground:1.5KVAC Output and to：0.5KVACInsulation resistanceBetween the input and output, the input and output, and ground:100M Ohms/500VDCStandardsSafety standardsAccord with UL1012 , UL60950 ,EN60950EMC standardAccord with EN55022(CLSPR22),EN61000-3-2,-3, EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024otherweight0.54Kgpackaging30pcs/16.7Kg/0.99CUFTnote1.All the parameters in has not specified, all is in 230 VAC voltage input, rated load and 25 ℃ conditions measuring income value.2.Ripple and noise voltage is in 20 MHz bandwidth oscilloscope take 12 inches twisted pair end with 0.1 mu and 47 u when capacitance measurement.3.Tolerance is voltage setting error, the voltage adjustment rate and adjust the sum total of the current rate.4.The power to consider as a device installed in final equipment, this equipment must be to make sure it’s EMC index.5.Specific output current see output drop forehead curve.