SCN-800

Features:High reliability, low rippleSwitch input voltage range choiceProtection characteristics: short circuit/overload/pressure/thermalBuilt-in distance open/shutdown and voltage compensation signal interfaceHas the parallel functionBy external 2 ~ 5 V voltage control, which can adjust the output voltage of the rated voltage of the in the range of 40% ~ 100% in valueBuilt-in dc electric fan forced air coolingOne year warranty Size : 291*132*68mm （L*W*H）modelSCN-800-12SCN-800-15SCN-800-24SCN-800-48outputDc output voltage12V15V24V48VOutput voltage tolerance±1%±1%±1%±1%Rated output current66A54A33A16.6AOutput current range0-66A0-54A0-33A0-16.6AOutput power800W800W800W800WRipple and the noise150mVp-p150mVp-p240mVp-p480mVp-pDc voltage adjustable scope+ 5%; By external 2 ~ 5 V voltage control, which can adjust the output voltage of the rated voltage of the in the range of 40% ~ 100% in valueStart, rise, keep time800ms, 50ms, 16ms Loaded withinputInput voltage range90～130VAC / 180～260 VAC by switch 47～63 Hz；The switch choice 260～370VDCExchange input current13A/115 VAC 8.0A/ 230 VACefficiency80%81%85%87%Impulse current60A/230VLeakage current3.5 mA/240VACProtection characteristicsOverload protection110%～135%Protection way: current limiting, delay shut off, restartOvervoltage protection110%~135%Protection way: cut output, restartHigh temperature protectionTSW1 (power tube) temperature > 100 ℃, restart when cut off outputenvironmentWorking temperature, humidity-10℃～+65℃,20%～90 %RHKeep temperature, humidity-20℃～+85℃,10%～95 %RHVibrate resistance10～200Hz,2G 10min.. / 1 cycle time, 60 minutes, the axissecurityCompression sexI/P-O/P, I/P-FG:1500VACInsulation resistanceI/P-O/P, I/P-FG, >100M Ohms / 500VDCstandardsSafety standardsAccord with UL1950,CSA22.2,IEC60950EMC standardAccord with FCC Part 15 Class Aotherweight2.65Kg;packaging6pcs/16kgnote1. All the parameters in has not specified, all is in 230 VAC voltage input, rated load and 25 ℃ conditions measuring income value.2. Ripple and noise voltage is in 20 MHz bandwidth oscilloscope take 12 inches twisted pair end with 0.1 mu and 47 u when capacitance measurement.3. Tolerance is voltage setting error, the voltage adjustment rate and adjust the sum total of the current rate.4. The power to consider as a device installed in final equipment, this equipment must be to make sure it’s EMC index.